Classic Car Engine & Rocker Cover Ceramic Resin Enamel Black Paint 400ml
Vintage Warehouse 65 Classic Car Engine Enamel Paint
The E-TECH BLACK Engine Enamel is a high quality, long lasting, gloss paint specially formulated with a ceramic resin to cope with temperatures up to 250°C and is ideal for use on most engine parts and components.
It is ideal for painting engine blocks, valves and rocker covers, gear casings and many other components and brackets.
Can Size 400ml Aerosol
It is a spray on application so quick drying and provides a hard, chip resistant, long lasting finish which retains its colour due to the high pigment content.
We have a range of 6 popular colours available in our store
Features:
Long lasting high quality gloss finish
Tough chip and crack resistant formula
Resists oil, engine additives, chemicals, road salt and weathering
Excellent durability chip & crack resistant formula
Heat rated to 250°C
No primer needed - strong adhesion to bare steel and metal*
Long term performance of this paint on aluminium and stainless steel surfaces cannot be guaranteed.
Not suitable for brass and other non-ferrous metals
PREPERATION - IMPORTANT: READ THIS
For best results ensure the engine or part you are painting, and the paint are at room temperature before use (approx 17°C to 21°C)
For best results apply in a warm, dry and dust free area
Use a steel brush to remove loose dirt and rust deposits from surface to be painted
Then clean the area to be painted thoroughly with a de-greaser or steam cleaner, removing all traces of silicone, oil, dirt, grease etc.
Mask off any area that you do not want to be painted
The area to be painted must be completely dry and thoroughly clean before you start.
APPLICATION
Shake can vigorously for a minimum of 2 minutes before use.
Hold can 20-30cm from surface and spray using a smooth side to side motion
Build up layers with several thin coats allowing approximately 15-20 minutes between coats for the surface to dry to a tacky film
(do not apply heavy coats).
Shake can between coats
After applying the final coat allow 4 hours for the enamel to dry properly.